Milling: A Complete Course (Workshop Practice) | 
 enlarge | Author: Harold Hall
Publisher: Nexus Special Interest Ltd
Category: Book
List Price: $12.98
Buy New: $8.88
You Save: $4.10 (32%)
New (13) from $8.88
Avg. Customer Rating:  9 reviews
Sales Rank: 22755
Media: Paperback
Pages: 144
Shipping Weight (lbs): 0.4
Dimensions (in): 8 x 5.8 x 0.3
ISBN: 1854862324
Dewey Decimal Number: 671.35
EAN: 9781854862327
ASIN: 1854862324
Publication Date: December 30, 2004
Availability: Usually ships in 1-2 business days
Condition: Brand New, Perfect Condition, Please allow 4-14 business days for delivery. 100% Money Back Guarantee, Over 1,000,000 customers served.
|
| Similar Items:
|
| Customer Reviews: Read 4 more reviews...
 This book is almost useless. August 18, 2008
I bought this book to learn how to run a mill I had just purchased. The first chapter explains what a mill cutter and a vice are. The second explains how to make T-nuts that I had already purchased. Chapter 3 instructs the reader to go to your lathe, which I don't have, and make a tool necessary to go any further in the book. So, if you don't have a lathe, or any intention to buy one, this book is a waste of money. It's also written in "english" english rather than "american" english and every dimension is in millimeters rather than inches. If you also have a lathe and this book's companion, "Lathework - a complete course", by the same aurthor, the pair might prove useful.
 Some One Can not do the Math January 19, 2008
1 out of 6 found this review helpful
One Minute he is trying to do things all in metric but he is in england so half of it does not translate to metric easy. Most of what he has done can be made to work and work great. Still he make dove tails using a backwards was to do it half arsed. Use the right tools if you are going to machine things then buy the tools to machine them when you have to. Some of the photos need to be a little clearer so we would understand better. I do like some of the small project he thinks we need and he is right we do need them no matter what.
73
dray
Title a misnomer, but still a good book. September 16, 2007
8 out of 8 found this review helpful
The title of the book is a misnomer, since this is far from a complete course on milling. It is, however, a good book for a starter for somebody who's bought a small home mill and has discovered that it's missing even the most basic tools and has no real instructions with it. I've been a machinist since the mid-1980's and have plenty of practice and tools, and there were even a few items among the projects that I intend to build. Given the price, if you've just bought a small mill and haven't the foggiest idea what to do with it, this book is money well spent. I gave it only four stars, however, mainly because it's not what it claims to be when it says it's a "complete" course. Instead, it's an excellent place to start.
 Harold Hall Fan July 26, 2007
9 out of 9 found this review helpful
I have bought three of Harold Hall's books, and they have all been read, used and re-read.
His writing is clear, expert, well illustrated with clear photographs and drawings and the projects are very suitable to anyone starting in this fascinating field of metal working. They are good bed side reading and/or workshop guides for the actual projects.
The books in the Workshop Practice Series are compact, about 128 pages, but contain a surprisingly large amount of information, and are good value.
The projects in "Milling" are graded from easy to intermediate difficulty, and each tool made can be used in later projects. Each project introduces new milling techniques and information, and in the course of the entire book most major milling procedures which might be used by the hobbyist are covered. The subtitle "A complete course" is appropriate.
The tools look really interesting and useful, and I plan to make most of them.
I strongly recommend this book, and also "Lathework- A Complete Course" and "Tool and Cutter Sharpening" by the same author.
Milling a complete course May 13, 2007
9 out of 9 found this review helpful
Very good for learning new techniques. Covers setup and operation of most home shop mills. I am building the advanced tool sharpener holder which is one of the projects presented. It was an unexpected challenge to convert the dimensions from mm to inches, but a good exercise.
I also learned several milling techniques that I was unaware of. A great book for the price. The "Lath a complete course" is a good companion book and both books compliment each other.
|
|
|
