Foam Pads Work Great (with a little problem)June 20, 2008 1 out of 1 found this review helpful
I purchased and used these foam pads with my orbital sander machine and they worked great and did a fabulous job a polishing my boat. The small problem is how it attached to my orbital sander backing pad, which is a hook & loop type (Velcro). The backing of the foam pad is made for this type of attachment, but has a small fiber profile. The fibers should be larger and more aggressive for better holding power to the machine. After a short while of use, the foam pad would fly off the machine when I let go of the trigger and moved away from the surface I was polishing. I managed to finish the job by holding the machine and foam pad against the surface until it came to a full stop before removing the machine away. I never have this problem when using sanding disks.